Pengeskab Olle I-3 - Deponering - Nøglelås

Pengeskab Olle I-3 - Deponering - Nøglelås

Inner Safe - 510 mm Width - GTA and GTB

Inner safe with cylinder lock to have your safe fully organized. This inner safe is single-doored.

Can be mounted or demounted at later stage.

Available in Light Grey (RAL 7035) and Graphite Grey (RAL 7024).

Fits with:

  • GTA 40 - GTA 50
  • GTB 40 - GTB 50
1.400,00 kr 1.120,00 kr
In stock
Varenummer
FT-900003-00003-510MM

Yderligere Information
NavnInner Safe - 510 mm Width - GTA and GTB
Leveringstid4-5 uger
SkabsformTilbehør
Kompatibel medGTA 40 / GTA 50
Vægt - kg10
LåsNøglelås
LåsetypeCylinderlås
Højde - udvendig (mm)196
Bredde - udvendig (mm)510
Dybde - udvendig (mm)253

Inner safe with cylinder lock to have your safe fully organized. This inner safe is single-doored.

Can be mounted or demounted at later stage.

Available in Light Grey (RAL 7035) and Graphite Grey (RAL 7024).

Fits with:

  • GTA 40 - GTA 50
  • GTB 40 - GTB 50
Customer Questions
Hvilken grad af indbrudsbeskyttelse er den rigtige for dig?

De beløb, der kan sikres i et bestemt pengeskabe variant på tværs af europæiske lande. Pengeskabe skal certificeres i henhold til EN-1143-1 eller EN 14450-forskrifterne. Disse veldefinerede standarder klassificerer pengeskabe i sikkerhedsgrader. - Som ses i tabellen under artiklen.

Safe locks: All you need to know

Find below the most Frequently Asked Questions regarding security, battery and other concerns of Safe Locks.

Order & Delivery: All you need to know

SafeGear offers you a wide variety of delivery options. We find the best delivery partners and ensure fast and safe delivery. To our services belongs delivery with or without installation and standard or express delivery. The following guideline will give answers to all questions you may have.

Install a safe: How can I bolt the safe myself?

Be aware that there are no wiring or piping in the location you want to install the safe.  

Follow these steps to bolt your safe:

You can easily bolt your safe following 8 simple steps.

1. Place the safe onto its final position.
   2. Mark the spot on the floor or the wall where the bolting holes are located.
   3. Move the safe aside.
   4. Make sure you use the right drill for the material and an appropriately sized drill bit.
   5. Drill holes into the designated marks.
   6. Reposition the safe over the mounting hole.
   7. Insert the bolt through the inside of the safe into the hole.
   8. Tighten up the nut of the bolt.

 

 

fandt du hvad du ledte efter?