Data Insert Alpha - Fire Test 120 min - Paper Star Plus

Floppy disk insert for installation in Paper Star Plus 3. Equipped with fire protection S 120 P / DIS.

18.574,00 kr 14.859,20 kr
In stock
Varenummer
FT-900003-00029

Yderligere Information
NavnData Insert Alpha - Fire Test 120 min - Paper Star Plus
ModelAlpha - Insert for Paper Star Plus 3
FarveLysegrå (RAL 7035)
LeveringstidRing for leveringstid
SkabsformTilbehør
Egnet tilData
Kompatibel medPaper Star Plus 3
Vægt - kg64
BrandklasseDI 120 DIS: Indvendig temperatur under 50°C og luftfugtighed under 85%, efter 120 minutters eksponering af 1090°C varme.
Brandtestet efterEN 1047-1: Beskytter mod eksponering af varme i 60 eller 120 minutter. Temperaturen overskrider ikke 50°C for disks, 70°C for data, eller 170°C for papir.
Brand TestcenterECB•S Germany
Kapacitet - Liter12
Højde - udvendig (mm)593
Bredde - udvendig (mm)375
Dybde - udvendig (mm)430
Højde - indvendig (mm)380 kr
Bredde - indvendig (mm)150 kr
Dybde - indvendig (mm)213 kr
HængslerHøjre side

Floppy disk insert for the installation in the Document Safe Paper Star Plus 3. The disk insert makes it possible to also store data media in the document safe. It offers 2 hours of fire protection for data carriers (S 120 P / DIS protection according to EN 1047-1, tested by IBMB / MPA at the TU Braunschweig, Germany).

The insert has 2 levels and 1 shelf for the storage of floppy disks.

Customer Questions
Hvilken grad af indbrudsbeskyttelse er den rigtige for dig?

De beløb, der kan sikres i et bestemt pengeskabe variant på tværs af europæiske lande. Pengeskabe skal certificeres i henhold til EN-1143-1 eller EN 14450-forskrifterne. Disse veldefinerede standarder klassificerer pengeskabe i sikkerhedsgrader. - Som ses i tabellen under artiklen.

Safe locks: All you need to know

Find below the most Frequently Asked Questions regarding security, battery and other concerns of Safe Locks.

Order & Delivery: All you need to know

SafeGear offers you a wide variety of delivery options. We find the best delivery partners and ensure fast and safe delivery. To our services belongs delivery with or without installation and standard or express delivery. The following guideline will give answers to all questions you may have.

Install a safe: How can I bolt the safe myself?

Be aware that there are no wiring or piping in the location you want to install the safe.  

Follow these steps to bolt your safe:

You can easily bolt your safe following 8 simple steps.

1. Place the safe onto its final position.
   2. Mark the spot on the floor or the wall where the bolting holes are located.
   3. Move the safe aside.
   4. Make sure you use the right drill for the material and an appropriately sized drill bit.
   5. Drill holes into the designated marks.
   6. Reposition the safe over the mounting hole.
   7. Insert the bolt through the inside of the safe into the hole.
   8. Tighten up the nut of the bolt.

 

 

Fireproof Safes: What Makes a Safe Fire Resistant?

Fire resistance means that the safes resist heat and smoke (and some protect against water) over a given period of time.

Fire resistance is created by the use of certain materials inside the walls of the safe. The walls are filled with a special concrete and water mix. The relatively high amount of bound water in the mixture prevents the safe from heating up too fast. The walls and the door not only include special materials but also are thicker than security safes that are not fireproof. 

Common fire resistance levels:

Fire Safes Resistance Insulated Fire insulation layer -not certified- that protects from initial phases of a fire.

Fire Safe Resistance 30 min Internal temp. under 170ºC for 30 min with external temp. above 842ºC

Fire Safes Resistance 60 min Internal temp. under 170ºC for 60 min with external temp. above 842ºC

Fire Safes Resistance 90 min Internal temp. under 180ºC for 90 min with external temp. above 1006ºC

Fire Safe Resistance 120 min Internal temp. under 170ºC for 120 min with external temp. above 1090ºC

fandt du hvad du ledte efter?